Safety Visual Glazing Strip - Frosted

Make glazing safe, add privacy, and keep the room bright — all while satisfying AS1428.1-2009. The Safety Visual Glazing Strip in Frosted applies a 75mm contrast band that obscures sightlines without blocking natural light. Durable, weather-resistant and quick to apply on glass doors, windows, partitions and shopfronts, indoors or out.

Where it's used

• Corporate offices — a professional, low-glare finish on glass walls and meeting rooms.
• Schools, hospitals & council buildings — meet accessibility requirements with added discretion.
• Retail & hospitality — safe shopfronts, cafés and hotels that still look the part.
• Apartments & common property — entryways, balconies and partitions where subtle privacy helps.

Why this one

• AS1428.1-2009 compliant — 75mm band, ≥30% luminance contrast.
• Frosted finish adds privacy while keeping natural light.
• Peel-and-stick adhesive backing — fast, residue-free application.
• Indoor and outdoor rated; long service life.
• Buy only what the job needs: 1m, 5m, 10m or 50m rolls.

Compliance tip: Apply the contrast band at 900–1000mm above floor level across the glazed panel, per AS1428.1-2009.

How to install

You'll need: tape measure, level, glass cleaner or soapy water, squeegee or clean cloth, and scissors/a sharp blade.

1. Clean the glass. Wipe with glass cleaner or soapy water and dry fully — adhesion fails on dust, grease or moisture.
2. Mark the height. Measure and lightly mark the band line at 900–1000mm above floor level, then run masking tape along it as a straight-edge guide.
3. Measure and cut. Cut to the panel width, allowing a few mm each end to trim flush.
4. Apply. Peel the backing, line the top edge to your guide, and smooth on from one end, pressing out air as you go.
5. Tip — wet apply for long runs. Lightly mist the glass with soapy water first; this lets you slide the strip into position before squeegeeing the water and air out for a bubble-free finish.
6. Finish. Press all edges firmly, trim the ends, remove the tape, and leave 24 hours before cleaning so the adhesive sets.

Also available in: Black — for light backgrounds · White — for dark backgrounds

Dispatched from our Wetherill Park warehouse. Need 50m+ or a project quantity? Contact us for volume pricing and a GST tax invoice.