Anti-Slip Floor Strip – Caution – 150×600mm

The "CAUTION" Anti-Slip Floor Strip is a ready-to-apply 150 × 600mm self-adhesive strip that warns foot traffic and grips underfoot in a single step. The aggressive aluminium-oxide grit surface delivers immediate slip resistance, while the bold pre-printed "CAUTION" legend flags the hazard without the cost of separate signage.

Built from aluminium-oxide grit bonded to a durable PVC film with an age-resistant acrylic adhesive, it holds firm on clean, dry surfaces indoors and out. The PVC and grit are non-conductive, making it suitable for areas where airborne static is a concern.

Where it's used: stair edges, ramps, walkway transitions, wet-area entries, loading docks, plant rooms, kitchens and bathrooms — anywhere underfoot slip risk needs to be both marked and controlled.

• Pre-printed "CAUTION" legend — hazard warning and grip in one strip
• Aluminium-oxide grit surface — high slip resistance underfoot
• Self-adhesive backing — peel, position and press; no tools required
• Water, mild acid, alkali and detergent resistant — holds up in wash-down areas
• Non-conductive — safe for static-sensitive environments
• Individually wrapped — clean handling and storage

Application: Apply only to a clean, dry, grease- and dust-free surface. Press firmly into position to activate the pressure-sensitive adhesive — the bond forms best at around 23°C. In cold conditions, condensation can reduce initial tack. On low surface-energy substrates an adhesion promoter may help. To protect the edges against moisture, oil and chemical attack, seal with a neutral-cure clear sealant to stop lifting.

Technical specifications

• Size: 150mm (W) × 600mm (L)
• Thickness: 0.8mm ±0.2mm
• Adhesion: 600 g/cm
• Tensile strength: 2.4 kg/cm
• Elongation: 25%
• Temperature resistance: −5°C to +50°C