SAFETY SWITCH HEAVY DUTY 4 OUTLET IP53 RCD + MCB PROTECTED

What is the purpose of this heavy-duty safety switch?
This unit is a portable power distribution solution designed for high-risk environments like construction sites and workshops. It allows you to safely run up to four devices from a single power source while providing advanced electrical protection for both users and equipment.

How many outlets does it have?
It features four (4) shuttered outlets. Each outlet has its own individual double pole on/off switch, allowing you to control each connected tool independently for better site safety.

What does the IP53 rating mean?
The IP53 rating indicates the unit is protected against limited dust ingress and light water spray (at an angle up to 60° from vertical). This makes it suitable for use in dusty workshops or on worksites where light moisture may be present.

Why is the unit red and the cord orange?
The high-visibility red housing and 1.8m orange lead are designed specifically for workplace safety. These bright colors help prevent trip hazards and ensure the unit is easily spotted by vehicles or other workers in busy industrial environments.

Is it built for trade use?
Yes. It features a heavy-duty portable design and a durable casing, making it rugged enough for daily use on construction sites, in industrial facilities, and during maintenance or repair work.

What is the power capacity of this unit?
The unit is rated at 240V, 10A, with a maximum total load of 2400W. You should ensure the combined wattage of all tools plugged into the unit does not exceed this limit.

What is the trip sensitivity?
The RCD is designed with a 30mA trip current, which is the standard safety threshold for protecting people against serious electric shock in Australia and New Zealand.

How long is the power lead?
The unit comes with a 1.8-metre heavy-duty mains lead, providing a practical reach from the primary power source to your workspace.

Does this unit comply with Australian safety standards?
Yes. This unit is fully compliant with AS/NZS 3190 (Approval and test specification - Residual current devices) and AS/NZS 3012 (Electrical installations - Construction and demolition sites). This makes it suitable for use on professional worksites where compliance is mandatory.

What happens if the unit overloads?
If the built-in MCB detects an overload, it will trip the power. You can restore power using the manual reset function once the excess load has been removed.

Can I use this with extension leads?
Yes, it works effectively with heavy-duty extension leads. However, it is always recommended to ensure your extension leads are also in good condition and correctly rated for the tools you are using.

How often should I test the safety switch?
For maximum safety, you should use the "Test" button on the RCD regularly (ideally before each use) to ensure the internal mechanism is functioning correctly.